意大利CEMP公司创立于1954年，全球著名的防爆电机品牌，总部设于意大利米兰附近的塞纳哥（SENAGO），是意大利最早制造防爆电机的企业之一。
经过半个多世纪的励精图治，CEMP现已经成为全球防爆电机制造业的领导者，开发出了全系列的应用于危险场合的防爆电机，除可提供刹车防爆电机、变频防爆电机、双速防爆电机、起重防爆电机、粉尘防爆电机、强制风冷电机、单相防爆电机、无火花电机等特种防爆电机外，还可提供温升等级达T5、T6、以及满足IE2标准的高效节能防爆电机系列。此外，CEMP公司还为客户提供特殊性能电机的设计制造咨询服务。
CEMP所有产品均获得ATEX 或 IEC-EX 防爆认证证书，其防爆电机已被广泛应用于全球的各个存在易燃、易爆环境的工业领域，特别是在军工、石油化工、FPSO等行业有着广泛的应用，以安全、可靠、专业、高效享誉全球。

CEMP是意大利最大的防爆电机厂家之一，在意大利，法国都有工厂，意大利工厂主要生产铸铁电机，法国工厂主要生产铸铝电机。在全世界内，著名的国外防爆电机品牌有ABB、SIEMENS、SCHORCH、FLENDER、WEM、LEESSON、BALDOR、ALSTOM 、EA等。（CEMP）的技术水平与这些电机同处一个档次，并且在一些专有的领域还有自己独特的优势，性价比极高。（CEMP）提供适应各种恶劣环境（如粉尘、水汽、烟气等等）的电机产品，包括矿用电机。满足您最严格、最苛刻的防爆和防护要求。

 

FLAMEPROOF ELECTRIC
MOTORS
E3.../E4A... SERIES - IE3/IE4
GAS & DUST VERSION
• According to standards:
- IEC/EN 600079-0, 1, 7, 31
- IEC 60034-1, 2, 5, 6, 7, 8, 9, 12, 14, 30
- IEC 60072
• Ex db, Ex db eb, Ex tb, Ex tc
* Terminal box Ex db or Ex eb available
* Continuous duty or intermittment duty
• Atex category I M2, II2G, II2D, II2GD
• Gas group I, IIB, IIC
• Dust group IIIB, IIIC
• Temperature classes T3, T4, T5, T6
• Surface temperature classes (Dust)
T150°C - T135°C - T125°C - T100°C - T85°C
• Protection IP55, IP56, IP65, IP66
• Frame size from 80 to 355 (IEC)
• Power 0,75 - 375 kW
• 400V, 50Hz (multi voltage 380-400-
415V/50Hz and 460V/60Hz)
• Pole 2, 4, 6, 8
• Self-cooling (IC411); Forced cooling (IC416);
Not ventilated (IC410); Totally enclosed air
over (IC418)
• Premium effi ciency IE3;
Super-premium effi cency IE4
Available IE1/IE2 (A Series)
• Certifi ed ATEX and IECEx
• Certifi ed GMEE
FLAMEPROOF ELECTRIC
MOTORS WITH BRAKE
E3.../E4D SERIES - IE3/IE4
GAS & DUST VERSION
• According to standards:
- IEC/EN 600079-0, 1, 7, 31
- IEC 60034-1, 2, 5, 6, 7, 8, 9, 12, 14, 30
- IEC 60072
* Motor enclosure Ex db (fl ameproof) and
brake in separate Ex db enclosure
* Terminal box Ex db or Ex eb available
* Multiple choice for brake torque available
* Continuous duty or intermittment duty
• Ex db, Ex db eb, Ex tb, Ex tc
• Atex category II2G, II2D, II2GD
• Gas group IIB, IIC
• Dust group IIIB, IIIC
• Temperature classes T3, T4, T5, T6
• Surface temperature classes (Dust)
T150°C - T135°C - T125°C - T100°C - T85°C
• Protection IP55, IP56, IP65, IP66
• Frame size from 80 to 315 (IEC)
• Power 0,75 - 200 kW
• 400V, 50Hz (multi voltage 380-400-
420V/50Hz and 460V/60Hz)
• Pole 2, 4, 6, 8 and dual speed motor
(separate windings or Dahlander)
• Self-cooling (IC411); Forced cooling (IC416);
Not ventilated (IC410); Totally enclosed air
over (IC418)
• Premium effi ciency IE3;
Super-premium effi cency IE4
Available IE1/IE2
• Certifi ed ATEX and IECEx
• Certifi ed GMEE
NON SPARKING ELECTRIC
MOTORS
TCN SERIES - IE3/IE4
GAS & DUST VERSION
• According to standards:
- IEC/EN 600079-0, 15, 31
- IEC 60034-1, 2, 5, 6, 7, 8, 9, 12, 14, 30
- IEC 60072
• Ex -nA, Ex-tb, Ex-tc
• Atex category II3G, II3G/II2D, II3GD
• Gas group IIB, IIC
• Dust group IIIB, IIIC
• Temperature classes T3
• Max surface temperature (Dust) T200°C
• Protection IP55, IP56, IP65, IP66
• Frame size from 80 to 355 (IEC)
• Power 0,75 - 375 kW
• 400V, 50Hz and 460V/60Hz
• Pole 2, 4, 6, 8
• Self-cooling (IC411); Forced cooling (IC416);
Not ventilated (IC410); Totally enclosed air
over (IC418)
• Premium effi ciency IE3;
Super-premium effi cency IE4
Available IE1/IE2
• Certifi ed ATEX and IECEx
• Certifi ed GMEEMECHANICAL
• Special fl anges and shafts
• Without terminal box with plate (cables
gland, or seal joints and conduit)
• Locked bearings, roller bearings or
special bearings
• Terminal box on side
• SPM probe (vibrations measurement)
• Double ended shafts
• Cable gland fi tted to terminal box
• Condensation drain valve
• Grade A or B vibration
• Rain cap or sun shield water shredding
disk
• Low noise
• Auxiliary terminal box
• Low (-60°C) temperature motorsELETRICAL
• Special voltage and frequency
• Three phase 2 speeds
• Single phase with permanent capacitor
• Motors for tropical climates
• Electrical special designs
• Class H insulation
• Suitable for frequency converter drives
ACCESSORIES
• Forced ventilation (IC416)
• Encoders (100 – 10000 ppr)
• Bearing sensors
• Bimetallic thermal protection (NC, NO),
thermistors (PTC), platinum resistor(PT100)
• Anti-condensation heatersBRAKES
• AC disc brakes
• DC disc brakes
• Brake hand release
• Braking when not energized
ENGINEERING SERVICES
• Start-up behavior analysis
• Superimposed curve (motor + driven machine)
• Load test and thermal test as per IEC 60034-2-1
• Torque speed curve measurement
(Dynamic method)
• Insulation test
• ATEX, IEC Ex and UL approved for thermal test
• Bureau Veritas and Korean Register approved